Local Room Heater
HYDROPELL dry stove is intended for use a room heater and may be used as a source of hot water for the central heating system. Part of hot air is emitted directly from the furnace through the window panel and by radiation through convection holes over the doors and in the top wall of the device. More than 80% of heat energy is given back to water in the water system of the stove.
Closed combustion chamber allows the installation of the HYDROPELL stove in rooms equipped with heat recovery.
|Energy efficiency class A++;|
|5 years warranty for heat exchanger tightness;|
|Heat exchanger made of certified high-grade steel;|
|High thermal efficiency in the range from 94,2 to 95,6% due to increased heat recovery from flue gases;|
|TIEMME controller. Operation of the central heating pump, automatic ignition process. Operation of the switching valve for the purposes of domestic hot water heating, domestic hot water heating mode. Cooperates with room controller or internal temp. sensor;|
|Equipment adapted for installation in the closed system if the protections are assembled in accordance with the operation and maintenance manual of the equipment;|
|Built-in expansion vessel;|
|Swirlers system increasing heat recovery from generated power;|
|The central heating pump being part of the equipment;|
|Fuel self-ignition system;|
|The furnace chamber is equipped with discharge pellet burner adapted for combustion of biomass;|
|Exhaust fan eliminating the problem with the chimney draught and stabilising the operation of the equipment;|
Specification / type
|Thermal power of water cycle||kW||8,5||10,3||12,3||16|
Thermal power given off to the environment
Seasonal energy efficiency
CO emissions at 13% O2
|Flue gas temperature||
|Minimal required flue gas draught||Pa||12||12||12||12|
Diameter of the exhaust gas socket
Maximum electric power consumption
Capacity of fuel container2
|Water tank capacity||l||22||25||28||32|
|Expansion vessel capacity||l||5||5||8||8|
1 Device weight depends on its additional equipment
2 Fuel tank capacity for pellet bulk density 600kg/m3
Height of device can be additionally adjusted by means of provided levelling legs.
The regulation of legs varies from 38 to 50 mm.